Pakedge Device & Software SE-USB1-EP, Быстрый старт

Страница: 2 / 7

2 3 SE-USB1-EP Quick Start Guide
Package contents
Thank you for purchasing this product.
Before installation, please verify that your
package contains the following items:
• Gigabit Ethernet PoE Pass-through
Switch (1)
• Screw (4)
• Alternative front panel (1)
• Quick Start Guide (1)
Introduction
The SE-USB1-EP is an in-wall solution to
extend the existing PoE network in the
home or office. The product is powered
by a single PoE+ input and supports
one PoE output port for connecting
PoE-powered devices such as a wireless
AP or IP camera (PD device) and one
Data Ethernet port for a Gigabit Ethernet
data connection. In addition, the device
has one USB type A socket which can
charge smartphones, tablets or other USB
powered devices.
Key features
• Provides two 10/100/1000 Mbps
RJ-45 ports including 1 802.3af PSE
port
• Powered by one 802.3at PD port
• Provides one USB type A connector
for power charger, max. power
output 5V/2A
• Complies with 10BASE-T
specifications of the IEEE 802.3
standard
• Complies with 100BASE-TX
specifications of the IEEE 802.3u
standard
• Complies with 1000BASE-T
specifications of the IEEE 802.3ab
standard
• Complies with IEEE 802.3az Energy
Efficient Ethernet
• Complies with IEEE 802.3af/at PoE
standard (DTE power via MDI)
• Supports MDI/MDI-X auto crossover
• Supports full- and half-duplex
operation
• Supports back-pressure (half duplex)
and flow control (IEEE 802.3x)
• Wire-speed packet filtering and
forwarding rate
• Store-and-forward architecture filters
fragment and CRC error packets
• Supports 2K MAC address entries in
whole system
• 128 KB frame buffer memory
• Supports 9K bytes Jumbo Frame
• FCC and CE Class B compliant