Pakedge Device & Software RSB-KIT Скачать руководство пользователя страница 4

Страница: 4 / 52

RSB-KIT INSTALLATION MANUAL

****

Warning

****

No Factory Reset

- The RSB-KIT was designed to be a very robust and exceptionally reliable product. Because

of this, you will find the RT-50V does not have a hardware or software reset button. The product can only be reset

by Pakedge either remotely, if the router is connected to a working internet connection with remote access or at

Pakedge’s facility. We highly recommend using the product only as described in Pakedge’s “Installation User

Manual” and “Advanced Setup User Manual”.

Preset IP Address Values

- the RSB-KIT was designed to simplify a complex Audio-Video Bridging Network

installation and is preconfigured for an “out - of - the - box” VLAN installation. Therefore, the IP address values of

all VLAN’s are predefined as described in the Installation User Manual. If different IP address values are absolutely

required, please be aware that changing them may affect other preconfigured features. Contact Pakedge support

for more information.

If you have further questions, email

[email protected]

or call

1-650-385-8703

for support.

Содержание RSB-KIT




















































Результаты поиска

Содержание RSB-KIT

Отзывы:

Бренды по названию

Популярные бренды

Pakedge Device & Software RSB-KIT, Руководство по установке

Результаты поиска

Содержание RSB-KIT

Отзывы:

Бренды по названию

Популярные бренды