Installation Instructions for
PakPod Harness Straps
These instructions assume that there are D-rings appropriately placed on the hull so that straps can be
attached. Instead of D-rings, other options like string loops will also work well on most kayak hulls.
Each PakPod comes with two harness straps, one for each end of the bag. Each harness strap has two
quick-release buckles to attach to the bag. Please remove the harness straps and attach to the hull as
described below.
1.
The shorter harness strap fits the forward end of the PakPod and will be
installed across the hull. Insert one end of the strap through a D-ring from
below as shown in picture #1.
2.
Insert the end through the nearest D-ring
in the harness strap as shown in Picture #2.
Thread buckle and tighten strap as shown in
Picture #3. Repeat the above process with
the other end of the harness strap on the
opposite side of the kayak. Install the other
harness strap the same way for the other end
of the PakPod.
3.
Clip the bag to the harness as shown in Picture #4. The PakPod can
quickly and easily be disconnected from the harness and used as a paddle
float.
