Remove the first piece from
the bag and place it on the
towel with the instruction
label facing up. This will be
the bow tower.
1.
2.
Remove the second
piece from the bag and
place on other side of the
towel with the bulkhead
facing up. This will be the
stern tower.
With the bag standing upright, unclip sides and
unzip the bag. Flip the front over to reveal the
Pakayak parts. Unfold the towel (included) and lay
on the ground. Remove the foam seat that is nestled
in the front bottom of the bag and put aside. You
will be assembling the two halves of the boat at the
same time on the towel, then you will lay them both
down and clamp the two halves together.
3.
Assembly Instructions
The pieces fit together in only one way, so it should be quite simple. Plus, you can always refer to the
Assembly Instructions sticker on the bulkhead beneath the towel.
Remove the fourth piece
from the bag and place it
on the stern tower. Open
the hatch cover, reach
inside and latch 4 clamps.
Remove bow piece from
bag and place on bow
tower (removing the black
wrap and securing it to a
strap on the bag). Reach
up inside hatch and latch
3 clamps. Replace hatch
cover.
Remove the third piece from
the bag and place it on the
bow tower. Open the hatch
cover, reach inside and latch
4 clamps.
Remove the tail piece from
bag (look inside to see
location of clamps). Place
it on stern tower. Reach up
inside the hatch and latch
3 clamps. Replace the hatch
cover.
5.
7.
4.
6.
IMPORTANT:
As you remove each section, check the gaskets to ensure they are clean. Remove
any debris before assembling.
The clamps have a self-locking tab and a spring that keeps them open when not latched. If a
clamp is not latched correctly, it will spring open. Be sure the self-locking tab is engaged when
clamp it latched.
Содержание Bluefin 14
Страница 1: ...Owner s Manual...