PAJ POWER FINDER 4G, Руководство пользователя

Страница: 4 / 13

1.4 Connection to vehicle
Please note the following points, before connecting to the vehicle:
• SIM card already placed in the USB GPS Finder
• The USB GPS Finder must only be connected to the designated 12V socket
in your vehicle
• No other parts of your vehicle should be damaged by the attachment
On most newer vehicles, the power supply to the 12V socket is interrupted
as soon as the vehicle has been switched off. This means that the FINDER
is no longer supplied with power and switches off after approx. 30 minutes.
However, on some vehicle models, it is possible for the vehicle battery to be
discharged while the vehicle is stopped in order to supply power to the USB
GPS Finder. However, if you regularly drive your vehicle, this should not be a
problem if the battery is intact, as it will always be sufficiently recharged by
driving. If this is not the case, please check whether your battery has dischar-
ge protection before connecting it and upgrade it if necessary. The FINDER
requires approx. 10-20 mAh in standby mode
NOTE!
Please always observe the manufacturer‘s specifications for your
vehicle. Claims for damages for improper connections are excluded.
1.5 Installation
Search the 12V socket in your
vehicle.
1.
2.
Plug the FINDER into the 12V
socket.
•
3.
The LEDs light up, when the
device is connected correctly.