PAJ GPS VEHICLE FINDER 2.0, Руководство пользователя

Страница: 4 / 13

1.4 Connection to vehicle
• SIM card already placed in the VEHICLE Finder 4G 2.0
• The VEHICLE Finder 4G 2.0 should not be attached to gasoline lines or other
flammable components
• No other components on your vehicle should be damaged by the attachment
By installing the VEHICLE Finder 4G 2.0 on the vehicle battery, it is possible
that this will be discharged to power the VEHICLE Finder 4G 2.0. If you regular-
ly use your vehicle, this should not be a problem with a functioning battery, as
it is constantly recharged by driving. If this is not the case, please check before
connection whether your battery has a discharge protection and, if necessary,
retrofit this. In idle state, the FINDER requires about 10-20 mAh
1.5 Installation
Mount the FINDER with the help
of the adhesive strip in the engine
compartment
1.
2.
Connect the FINDER via the black
plug function to the wiring harness
•
3.
Connect the FINDER to the battery.
Connect the
red cable with the fuse
to PLUS (+) . Connect the black
cable to Minus (-)
Please note the following points, before connecting to the vehicle:
NOTE!
Please always observe the manufacturer‘s specifications for your
vehicle. Claims for damages for improper connections are excluded.