PAJ GPS EASY FINDER 2.0, Руководство пользователя

Страница: 16 / 64

Car Finder 2.0 by PAJ with Online-Tracking V.1.0 EN
© PAJ UG (haftungsbeschränkt)
16
2.5 Connection inside the vehicle
The following points must be observed by all means
The Car Finder 2.0 should not be installed near
fuel lines or other combustible components in the
engine compartment.
When mounting the Car Finder 2.0, please make
sure that no other components in the vehicle are
damaged.
Installing the Car Finder 2.0 may discharge your
vehicle battery. Before connecting, check whether
your vehicle has a discharge protection and
retrofit it if necessary.
Please always observe the manufacturer's
specifications for your vehicle. Compensation
claims due to incorrect connections are hereby
excluded
Connect the Car Finder 2.0 to the appropriate socket
in your vehicle using the OBD interface. Please make
sure that the Car Finder 2.0 is inserted deep enough.
The OBD interface has no standardized position in
the vehicle. The user manual of your vehicle can
provide you with this information
2.6 Turning on
Once the activation, switching on and the transfer of
a first database has been successful, you can switch
on the Car Finder 2.0. By connecting the FINDER to
the power supply, which was previously carried out, it
has already been switched on.
For the initial startup of the Car Finder 2.0
uncovered locations, such as the garden or the
terrace (i. e. not inside the home, the garage, the
cellar or the like) are recommended.
2.7 Use
Once the activation and switching on of the FINDER
has been successful, you can plug the FINDER into
OBD-interface and view the position of the FINDER
using a smartphone, tablet or PC. Please use our app
or go to the following website:
www.finder-portal.com
The portal will support you step by step in its
functions.