20
6.5)
Remove the Bushings from both ends of shaft
6.6)
Remove Shaft
Note: The direction of Feed Roller Rotation (One Way Bearing) makes sure the new
roller rotates in the same way direction
6.7)
With feed roller removed you can now remove the Separator(Pad Base)
Note: it
’
s orientation in the machine: Metal edge towards the In-feed Tray
7)
Folding Drum (Old Type)
7.1)
Fully Extend the Folding Unit on its rails
7.2)
Unlock the Folding Drum Assembly
7.3)
Rotate the Folding Drum all the open
7.4)
Insert a flat head screwdriver in the right
corner of the pivot point and pry the tab
out of the hole as shown in the picture on
the right
7.5)
Remove the Folding Drum(Please reverse
the steps to put the Folding Drum back)
Pressure Sealer ES-5000
