Provisioning
150-231-185-05, Revision 05
20
September 13, 1999
HLU-231 List 8E
Set Date
To set the system date, type the month, day and year in a mm/dd/yy format, then press
. The Update
Remote field appears.
Update the HRU Time and Date
The remote unit date and time is set by using this option. Do one of the following:
•
Press
to update the HRU to the same date and time set for the HLU-231 List 8E.
•
Press
. (The date and time are not updated.)
System Settings Screen
The options set from the System Settings screen are the same as the options set through the HLU-231 Mode and
SEL buttons on the front panel. The exceptions are Margin Alarm Threshold and DS0 Blocking, which can only
be set at this screen. Refer to
for a listing of system setting options. Press
at the Maintenance
Terminal Main Menu to open the System Settings screen (
Figure 8.
System Settings Screen
You have the following options at the Systems Settings screen:
•
Press the desired option letter to change that setting.
•
Press
to set all user options to the factory default values.
•
If changes were made, press
when exiting to confirm, or press any other key to ignore changes.
•
Press
to exit and return to the main menu.
When editing entries in the Set Clock screen and when using the Terminal emulation program
in Windows 3.1, pressing the
key deletes two characters instead of just one.
(17(5
%$&.63$&(
8
(17(5
&
SYSTEM SETTINGS
TIME: 12:46:06
DATE: 09/15/99
CIRCUIT ID#:
A. EQUALIZATION....: EXT P. MARGIN ALARM THRESH : 4
B. SMARTJACK LPBK.: ENABLED
Q. RLOS (DS1 LOS) ALARM: ENABLED
C. SPECIAL LPBK....: GNLB R. ALARM PATTERN.......: AIS
F. POWER...........: AUTO S. REMOTE PROVISION....: ENABLED
G. ZBTSI...........: OFF
T. BPVT................: DISABLED
H. BER ALARM THRESH: NONE
U. CDI.................: DISABLED
I. LOOPBACK TIMEOUT: 120
J. ALARM...........: DISABLED
K. DS1 LINE CODE...: B8ZS
L. FRAMING.........: AUTO
M. AIS ON HDSL LOSW: 1 LOOP
N. AIS ON SMJK/NREM: ENABLED
O. DS0 BLOCKING: xx = Blocked Channels
01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
(D)efaults, (E)xit
Enter the option letter to change setting
'
&
(