PairGain HiGain-ETSI RS UTU 712, Руководство пользователя

Страница: 44 / 80

System Configuration 700-712-100-01, Revision 01
36 May 10, 1999 UTU-712 and ETU-762 List 1
Configure LTU and NTU Interfaces
Select and configure the LTU- and NTU-related operating parameters as follows:
1 Type one of the following at the Config drop-down menu to display the Config LTU or NTU Interface menu:
•
for the Config LTU Interface menu ( Figure 24 ).
•
for the Config NTU Interface menu ( Figure 25 ).
Figure 24. Config LTU Interface Menu
Figure 25. Config NTU Interface Menu
The Data Rate/# of TSs and Beginning TS parameters in the Config LTU and NTU Interface
menus
are read-only displays.
The Data Rate/# of TSs value is set in the Config System
Settings menu as the “HDSL Payload Rate” (See Figure 23 on page 34 ). The Beginning TS
value is fixed at 0.
/
1