PairGain 150-2238-01 Скачать руководство пользователя страница 24 | Manualshive

Страница: 24 / 42

PairGain 150-2238-01 Скачать руководство пользователя страница 24

System Configuration

350-819-200-01, Revision 01

18

November 12, 1999

HLU-819 List 1

S

YSTEM

S

ETTINGS

The settings available in the Config System Settings menu are listed in

. The settings in boldface type are factory default settings.

Table 4.

Settings in Config System Settings Menu

System Setting

Description

Application mode

Select one of the following application modes:

UNSTRUCT

System operates in the unstructured (unframed) application mode
using 24 time slots. Use when LTU and NTU use either the DSX-1 or
Nx64K port with no framing. Two port (DSX-1 and Nx64K) operation
is not possible.

STRUCT

System operates in the structured (framed) application mode using
1 to 24 time slots. Use to transport framed voice channels between the
LTU and NTU DSX-1 ports and serial data between the Nx64K ports at
the same time.

TSP

System operates in time slot prioritization mode. Time slots 1 through
12 transport high priority traffic over Loop 1; time slots 13 through 24
transport low priority traffic over Loop 2. If a loop fails, time slots 1
through 12 are sent over the active loop. The NTU must be locally
powered. Remote Power Feed must be set to NONE.

SINGLE

System operates in single-pair mode using time slots 1 through 12 on
Loop 1. Use to transport framed voice channels between the LTU and
NTU DSX-1 ports or serial data between the Nx64K ports. The NTU
must be locally powered. Remote Power Feed must be set to NONE.

Remote Power
Feed Mode

Select one of the following power feed modes:

NONE

Disables the remote power feed mode. The NTU must be locally
powered. Used for TSP and SINGLE application modes.

POWER

LTU (HLU-819) supplies full power to the NTU through both loops.

WETTING

LTU (HLU-819) supplies a low level DC current to prevent corrosion
of HDSL lines and connections. The NTU must be locally powered.

«
...
22
23
24
25
26
...
»

Содержание 150-2238-01











































Отзывы:

Нет отзывов