363-704-121-01, Revision 01
Using This Technical Practice
FLC-704 List 2A
July 30, 1999
iii
U
SING
T
HIS
T
ECHNICAL
P
RACTICE
Three types of messages, identified by icons, appear in the text.
I
NSPECTING
Y
OUR
S
HIPMENT
Upon receipt of the equipment:
•
Unpack each container and visually inspect it for signs of damage. If the equipment has been damaged in
transit, immediately report the extent of damage to the transportation company and to PairGain. Order
replacement equipment, if necessary.
•
Check the packing list to ensure complete and accurate shipment of each listed item. If the shipment is short
or irregular, contact PairGain as described in the Warranty. If you must store the equipment for a prolonged
period, store the equipment in its original container.
Notes indicate information about special circumstances.
Cautions indicate the possibility of equipment damage or the possibility of personal injury.
You must wear an antistatic wrist strap connected to the ESD jack on the PG-Flex chassis to
perform the installation procedures. You must also observe normal ESD precautions when
handling electronic equipment. Do not hold electronic plugs by their edge. Do not touch
components or circuitry.
