manualshive.com logo in svg

PairGain 150-1260-24, Руководство пользователя

Поделиться
Скачать
PairGain 150-1260-24 Скачать руководство пользователя страница 36

Section 150-441-124

June 12, 1997

Revision 01

Page 32

PairGain Engineering - Plant Series

HiGain HLU-D41

19.7

Customer Loop HLU (CREM).

  The Customer Loop HLU (CREM) option allows you to send a

Customer Remote (CREM) loopback from the line unit (remote) towards the customer interface.  To
send a CREM loopback, press <G> in the Loopback menu.

The following prompt appears:

PLEASE WAIT................

A series of dots moves from left to right indicating that the command has been issued.  When this
process completes, the system returns to the Main menu.  CREM now appears next to the Loopback
Mode in the Main menu.  The loopback continues to cycle in the system depending upon your
Loopback Timeout setting.  You can always go back to the Loopback menu and press A to disable the
CREM loopback.

19.8

Customer Loop HRU (CLOC).

  The Customer Loop HRU (CLOC) option allows you to send a

Customer Local (CLOC) loopback from the remote unit (local) towards the customer interface.  To
send a CLOC loopback, press <H> in the Loopback menu.

The following prompt appears:

PLEASE WAIT................

A series of dots moves from left to right indicating that the command has been issued.  When this
process completes, the system returns to the Main menu.  CLOC now appears next to the Loopback
Mode in the Main menu.  The loopback continues to cycle in the system depending upon your
Loopback Timeout setting.  You can always go back to the Loopback menu and press A to disable the
CLOC loopback.

19.9

Customer Loop Doubler 1.

  The Customer Loop Doubler 1 (CDU1) option allows you to send a

CDU1 loopback at the first doubler towards the CI.  To send a CDU1 loopback, press <I> in the
Loopback menu.

The following prompt appears:

PLEASE WAIT................

A series of dots moves from left to right indicating that the command has been issued.  When this
process completes, the system returns to the Main menu.  CDU1 now appears next to the Loopback
Mode in the Main menu.  The loopback continues to cycle in the system depending upon your
Loopback Timeout setting.  You can always go back to the Loopback menu and press A to disable the
CDU1 loopback.

Содержание 150-1260-24



















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды