PairGain 150-1111-65 Скачать руководство пользователя страница 39 | Manualshive

Страница: 39 / 68

PairGain 150-1111-65 Скачать руководство пользователя страница 39

150-231-165-01, Revision 01

Maintenance

HLU-231 List 6E

September 22, 1998

29

Performance Data Screen: With Doubler

The Performance Data Screen displays information by span. With no doubler, there is only one span (

With multiple doublers (up to two), there can be as many as three span screens.

1

Press

from the Maintenance Terminal Main Menu to view the Performance Data screen.

2

Press

from the Performance Data screen to advance through the performance data screens for the various

spans.

is an example of a Performance Data screen that lists performance data for the third span (Doubler #2

to the HRU).

Figure 16.

Span 3 Performance Data Screen

V

IEW

P

ERFORMANCE

H

ISTORY

The View Performance History option allows you to access the 7 Day History screens that show the number of
ES and UAS occurrences in 24-hour increments for a seven-day period. Errored Seconds and Unavailable Seconds
for both HDSL loops and each of the two DS1 inputs are listed for the current and previous seven days. The
counters on all 7 Day History can be set to zero by pressing

(Clear).

Since the HLU-231 is considered the master module, this clears

all performance data screens at

both the HLU-231 and the HRU. The RS-232 terminal interface at the HRU does not allow the
counters to be cleared.

Date: 02/02/98 SPAN 3 PERFORMANCE DATA
CIRCUIT ID#:
ERRORED SECONDS/UNAVAILABLE SECONDS

DS1             HDSL-1 HDSL-2
HLU      HRU   HDU4   HRU     HDU4      HRU
00:00 000/000 000/000  000/000  000/000 000/000 000/000
00:15 000/000 000/000  000/000  000/000 000/000 000/000
00:30 000/000 000/000  000/000  000/000 000/000 000/000
00:45 000/000 000/000  000/000  000/000 000/000 000/000
01:00 000/000 000/000  000/000  000/000 000/000 000/000
01:15 000/000 000/000  000/000  000/000 000/000 000/000
01:30 000/000 000/000  000/000  000/000 000/000 000/000
01:45 000/000 000/000  000/000  000/000 000/000 000/000
02:00 000/000 000/000  000/000  000/000 000/000 000/000
02:15 000/000 000/000  000/000  000/000 000/000 000/000
02:30 000/000 000/000  000/000  000/000 000/000 000/000
02:45 000/000 000/000  000/000  000/000 000/000 000/000
03:00 000/000 000/000  000/000  000/000 000/000 000/000
03:15 000/000 000/000  000/000  000/000 000/000 000/000
03:30 000/000 000/000  000/000  000/000 000/000 000/000
03:45 000/000 000/000  000/000  000/000 000/000 000/000

(E)xit (P)revious (N)ext (S)pan

«
...
37
38
39
40
41
...
»

Содержание 150-1111-65





































































Отзывы:

Нет отзывов