Painless Track Rocker series, Руководство по установке

Страница: 10 / 24

6
Step 5: Before mounting the Track Rocker Switch Panel, you may wish
to loom the Switch Panel Wires. We recommend Painless ½”
PowerBraid (P/N: 70902) . Run the loom over the wire, and secure
the end of the loom with a zip-tie. Note: It isn’t necessary to loom
the entire wiring harness as you will cut these wires to length
later. Simply loom a few feet and make sure the end near the
switches is secure.
Step 6: The Switch Panel has a hole in each corner in order to mount
it to your selected surface. As these holes are not likely to exist
already, you’ll need to drill them out