FIRST MAKING SURE THAT THE IGNITION IS OFF, UNPLUG THE TWO
COMPUTER CONNECTORS BY PUSHING DOWN ON THE BLUE RETAINING TAB
AND THEN PULLING STRAIGHT OUT AND AWAY FROM THE COMPUTER. BE
CAREFUL NOT TO DAMAGE THE COMPUTER PINS! REMOVE THE BLUE
SECONDARY LOCKS FROM THE YELLOW COMPUTER CONNECTOR BY
RELEASING THE RETAINING CLIPS AND PULLING THEM OUT FROM THE
BACK (WIRE) SIDE OF THE CONNECTORS.
STEP 5 - CONNECTING THE CHARCOAL CANISTER WIRE AT THE COMPUTER
LOCATE THE 32 PIN YELLOW COMPUTER CONNECTOR. USING THE
ATTACHED WIRING DIAGRAM FOR REFERENCE, LOOK ON THE WIRE SIDE
OF THE CONNECTOR HOUSING FOR THE CORNER MARKED "F-1". ONCE
YOU HAVE LOCATED THIS, COUNT DOWN THE OPENINGS ON THE SAME
SIDE UNTIL YOU REACH "F-7". YOU WILL INSERT THE TERMINAL ON
THE DARK GREEN/YELLOW WIRE (CHARCOAL CANISTER) INTO THIS
OPENING, PUSHING IN UNTIL THE LOCKING TANG ENGAGES.
NOTE: THE TERMINAL WILL ONLY FIT ONE WAY INTO THE CONNECTOR,
DO NOT TRY TO FORCE THE TERMINAL.
STEP 6 - CONNECTING THE AIR DIVERTER WIRE AT THE COMPUTER
ON THE SAME CONNECTOR, IN THE SAME MANNER AS YOU DID IN STEP
5,
LOCATE
THE
"F-4" SIDE. THIS IS THE OPENING YOU WILL INSERT
THE TERMINAL ON THE BLACK/RED WIRE INTO. (AIR PUMP DIVERTER
VALVE)
STEP 7 - CONNECTING THE AIR PORT SOLENOID WIRE AT THE COMPUTER
ON THE SAME CONNECTOR, LOCATE "F-2". THIS IS THE OPENING
THAT YOU PLUG THE TERMINAL ON THE BROWN WIRE (PORT SOLENOID)
INTO, USING THE SAME PROCEDURE AS IN STEP 5 AND 6.
STEP 8 - REPLACING THE COMPUTER CONNECTORS AT THE COMPUTER
REPLACE THE SECONDARY LOCKS ON BOTH CONNECTORS. BE CAREFUL TO
LINE UP THE "FINGERS" ON THE LOCKS WITH THE CONNECTOR
OPENINGS.
ONCE YOU HAVE THE SECONDARY LOCKS IN PLACE THEN YOU
CAN REINSTALL THE COMPUTER CONNECTORS INTO THE COMPUTER.
CAUTION: USE CARE WHEN RE-INSTALLING THE THE CONNECTORS, TO
AVOID DAMAGING THE COMPUTER PINS.
NOTES:
DOUBLE CHECK ALL ROUTING MAKING SURE THAT THERE IS ENOUGH
SLACK TO ALLOW FOR ANY ENGINE OR OTHER MOVEMENT. REINSTALL
ANY GROMMETS OR OTHER PARTS TAKEN OFF.
START AND DRIVE THE VEHICLE FOR AT LEAST THIRTY MINUTES, THEN
CHECK FOR ANY TROUBLE CODES STORED IN THE COMPUTER.
PAINLESS WIRING OFFERS A TECHNICAL ASSISTANCE LINE TO ANSWER
ANY QUESTIONS YOU MAY HAVE. THE NUMBER IS (817)560-8324.
PHONES ARE ANSWERED MONDAY THROUGH FRIDAY FROM 8 AM TO 5 PM
CENTRAL TIME, NOT INCLUDING HOLIDAYS.
PLEASE LEAVE A MESSAGE IF YOU ARE UNABLE TO REACH US AND WE
WILL RETURN YOUR CALL AS SOON AS POSSIBLE.
9/29/95
2
