Page 10
Prepared for – all rights reserved. 2017a
7. Strength Dial Detail
When adjusting the
strength level dial to
“MAX” or "5" like
the figure, the output
value can be up to
the maximum
“5x26v”.
When adjusting the
Strength level dial to
“MIN”, it can go as low as “0x26v” or “0”.
o
Each massage session stops
automatically after 15 minutes of
operation. Repeat if desired.
o
Each mode can be detected by the
indicator light.
o
Confirm the strength level
dial is set on “0” or “MIN” before
starting the massager. Always
increase the strength dial
gradually until it feels
comfortable.
8. Plug and Conversion Switch
o
Output mode select switch can be set
on either “I” or “II”.
o
When using only one output (2 pads,
left socket), set the mode select switch
to “I”.
o
When using two output (4 pads, both
sockets), set the mode select switch
to “II”.
<Output Plug I, II Socket >
9. Battery Housing
1.5 volt x 2
batteries
Size standard
“AAA”
When replacing
the battery, push
the cover
downward to
open and insert
battery as
indicated.
Verify that the battery polarity (+/-)
is properly aligned.
o
Never use while doing strenuous
activity.
o
Keep out of reach of children.
o
Take out the batteries from the unit
when it’s not used for a long period of
time.
o
Do not keep the unit near fire or flame.
