Pai Technology 62101, Инструкция по эксплуатации

Страница: 18 / 20

Installing and changing
the batteries
Note:
The following steps should be done
either by an adult or under adult supervision.
Main control block:
Four 1.5 V AA batteries
Remote control:
Two 1.5V AA batteries
Lightbar: 3 1.5V AG13/LR44 button batteries
Changing the ba�eries
Use a Phillips head screwdriver. Unscrew the
screws on the ba�ery cover counter-clockwise.
Remove the ba�ery cover and take out the
ba�eries.
Insert the ba�eries according to the posi�ve and
nega�ve signs inside the ba�ery compartment.
Replace the ba�ery compartment cover and screw
clockwise to fasten.
FAQs
Q: How do I determine if the car ba�ery is about to run
out?
A: The amount of ba�ery power le� can be determined
by the following situa�ons:
Situa�on 1: The car ’ s speed is no�ceably slow.
Situa�on 2: Its ac�ons are slow or unresponsive.
Situa�on 3: It won ’ t start up.
Q: What do I do if the car won ’ t start?
A. There are a few possibili�es. Confirm which one applies:
1. The ba�eries have no power. Please change them.
2. The ba�eries are installed backward. Please re-install them.
3. The on-off switch isn ’ t switched on. Please try turning it on again.
4. The first �me you used the remote control it wasn ’ t synced. Please sync it
according to the direc�ons.
5. You didn ’ t remove the transparent insula�on tape from the remote
control. Please remove it.
6. The wheels have been stopped up with a foreign object, e.g., hair or trash.
Please clear it away.
7. If you ’ re s�ll having issues, please contact Customer Service.
Place the positive pole of the battery on
the left and install it vertically.