Pahlen Jet Swim 2000, Инструкция по установке

Страница: 9 / 30

A-A A-A
A
A
-2
00
1100
24
0
60
0
13
0
�
13 (2x)
360
630
15
0
10
0
21
1
55
0
17
0
� 410
(210)
(480)
200
953
Dimensions put in brackets refer to item no. 132010 for liner pools.
Item no.
1302000 Jet Swim 2000 unit
1302010 Jet Swim 2000 assembly kit for liner pool
1302020 Jet Swim 2000 assembly kit for concrete liner pool
1302030 Jet Swim 2000 assembly kit for concrete pool
1302080 Jet Swim pump 4,0kW
1302090 Control box Jet Swim 2000
To avoid flooding the engine room must have a drain.
Installation
The Jet Swim pump is activated with an air impulse via the ”on/off” push
button. The start hose must be fixed in a loop 150-200 mm above the water
surface and connected to the pressure switch placed on the side of the
automatic cabinet.
The pump capacity is 1300 l/min.
The jet is controlled using the knob marked ”flow”.
With the knob turned to ”air” the strength of the jet can be regulated by
increasing or decreasing the amount of air introduced into the jet of water.
Fasten the air hose 100 mm above the water surface behind the pool.