pagertec Smart Stack EVO, Руководство пользователя

Страница: 5 / 11

OPERATION
1.
​ ​
When a guest arrives, remove a pager from the charging stack. Pagers will light up for 3
seconds.
2. ​ ​ Record the pager number and hand to your guest.
3. ​ ​ Page the pager by entering the number into the transmitter.
4. ​ ​ Pagertec Smart Stack EVO Coaster Pagers will flash or vibrate (if enabled) depending
on the page mode sent by the transmitter.
​
Note:
​ ​
Beep modes will still flash and vibrate (if enabled) with no audible beep.
5. ​ ​ Transmitters can also send predefined time limits for each of the pager alert modes.
BATTERY INSTALLATION
​ The rechargeable nickel metal hydride (NiMH) batteries will typically last from one to
three years depending on usage. To replace the battery pack, first remove the back
screw from the rear of the pager using a small Phillips head screwdriver. Lift the back
door from the bottom to open. Place the door and set screw in a safe place for closure
after changing the rechargeable batteries. To facilitate battery replacement, in situations
where the low-profile belt-clip is in use, temporarily remove the belt clip too. Next,
carefully remove the old batteries. Place in the new replacement batteries (2 AAA
NiMH batteries). Replace the battery door and re-secure it into place using the Phillips
head set screw.