Range Test:
This option allows you to do a range test with the pagers. To use it you will need the capcode
the pagers have installed as the range test capcode.
Serial Protocol:
This option allows the Transmitter to have a serial input to a PC via USB
Default:
Boomerang
Reset Device:
This option will reset the transmitter.
FCC COMPLIANCE AND ADVISORY STATEMENT
This device complies with Part 15 of the FCC rules. Operation is subject to the following
two conditions: (1)
this device may not cause harmful interference, and
(2)
this device
must accept any interference received, including interference that may cause undesired
operation.
This equipment has been tested and found to comply with the limits for a Class B digital
device, according to Part 15 of the FCC rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try correct the interference by one or more of the following measures:
Содержание Matrix Stand Alone
Страница 1: ...Matrix Stand Alone with BMTX Manual...
