Low Battery Indicator:
When battery power reaches low levels,
is
displayed, prompting you to change the battery. All pager alerts change to two
seconds in length.
Message Erase:
Messages can be erased all at once or selectively at your choice to
free space in memory.
Memory Retention:
All messages remain in memory, even when the pager is off and
while the battery is being replaced.
Memory Capacity:
The
NP88 POCSAG
pager can store up to sixteen
20-character messages, for a total of 320 characters.
Message Protect:
You can protect up to eight messages stored in the pager
memory.
Overflow:
is displayed when all message slots are filled and a new
message is received. After you read all of your unread messages, the standby screen
is displayed.
Automatic Alert Reset:
The pager alerts automatically stop, even if no buttons are
pressed.
Continue Alert:
When PPS is selected Continue Alert, pager will alert until any
buttons are pressed after receiving messages.
Function Bits Alert:
Set Audio & Alert and select “ALERT FUNC”. When pager
receives a message with different Function Bits, it will alert depends on what tone
pattern is selected.
Personal Alarm:
This alarm can be set to alert you. The alarm works even when the
pager is off.
Reminder Alert:
The pager chirps or vibrates every two minutes until you read all
unread messages.