12
6. Run-Time, Capacity & Data
6.4
PAG Numeric Display Data Output
Data stored in the battery’s microprocessor can be revealed using the
battery display.
Press display button
x3 in 1 sec intervals &
hold for data mode
Release to see 1st
menu item: ‘Pd’
(voltage)
Press & hold for
3 seconds to see
voltage reading
Press without holding
for 2nd menu item
Press & hold for temp-
erature in degrees
celsius
Press twice
without holding
for 3rd menu item
Press & hold for
number of charge/
discharge cycles
Press x3without
holding for software
version
Press & hold for
version number...
Press x4 for
computer reset
Press & hold to perform
reset & do not release
until 3 lines disappear
...which appears in
2 parts indicating
version 5.7
After selecting to view the software version number, the battery will enter
Sleep Mode
automatically.
Sleep Mode
reduces battery self-discharge and can
be used when you are going to store or ship your batteries. To exit Sleep
Mode or ‘wake’ the battery, press the display button twice, link 2 batteries or
connect the battery to a charger.
