background image

Product Specific Safety Instructions

1.  WARNING This machine is intended for the vacuuming 

 

of liquids as well as wet or dry dust and debris off 

 

carpeted or hard floor surfaces in indoor areas only. 

2.  WARNING Do not use the machine for suction 

 

of dry dust and debris without filters in place. The use 

 

of paper or polyester dust bags is optional. 

3.  WARNING Remove polyester filter and dust bag 

 

(if using) and ensure foam filter is in place before use 

 

for suction of liquid.

4.  Check the position of the filter and fastening of latches. 

 

Incorrect filter positioning can cause diminished 

 

performance and/or serious damage to the machine. 

5.  The machine features a floating valve that interrupts 

 

the vacuum when the tank is full. In the event of a 

 

total loss of suction, turn the machine off, turn the 

 

power outlet off, unplug the machine and empty 

 

the tank. 

6.  Weekly clean the polyester filter by brushing off 

 

or washing, however ensure it is completely dry 

 

before reinstalling.

7.  CAUTION Take extra care if using this vacuum 

 

cleaner to clean stairs.

8.  The following models have a “A-weighted emission 

 

sound pressure level (measured at 1.5 meters) of: 

 

Hydropro 21 - 76 ± 3dB(A) 

 

Hydropro 36 - 72 ± 3dB(A) 

 

Hydropro 76 - 75 ± 3dB(A) 

9.  Brush and Attachment Use
 

Part No.  UA908/E900D/E900D400 -Dry Floor Tool 

 

is intended for vacuuming of dry dust and debris 

 

off floor surfaces.

 

Part No.  KC918/E900W/E900W400 - Wet Floor Tool 

 

is intended for vacuuming of liquid or wet dust and 

 

debris off floor surfaces.

 

Part No.  KC910/E902 - Dusting Brush 

 

is intended for vacuuming of liquid or dust and debris  

 

from delicate surfaces.

 

Part No.  KC911/E903 - Crevice Tool 

 

is intended for vacuuming of liquid, dust and debris 

 

from crevices.

 

Part No.  KC912 - Upholstery Tool 

 

is intended for vacuuming of liquid or dust and debris  

 

from upholstered surfaces.

Symbol Definitions

1. 

 

 

 

 

Meaning of crossed–out wheeled dustbin: 

 

Do not dispose of electrical appliances as unsorted 

 

municipal waste, use separate collection facilities. 

 

Contact your local government for information 

 

regarding the collection systems available. 

 

If electrical appliances are disposed of in landfills 

 

or dumps, hazardous substances can leak into the 

 

groundwater and get into the food chain, damaging 

 

your health and wellbeing. 

 

Europe Only - When replacing old appliances

 

with new ones, the retailer is legally obligated

 

to take back your old appliance for disposals

 

at least free of charge. 

2. 

 
 

The CE Mark certifies that a product has met

 

EU consumer safety, health or environmental 

 requirements.
3. 

 
 

Class II, Double Insulated Appliance.

4. 

 

The Regulatory Compliance Mark (RCM) indicates a 

 

device’s compliance with all applicable ACMA 

 

regulatory arrangements.

5. 

 

Operator’s Manual; Operating Instructions

6. 

 Attention!
7.   Transportation and Storage 

 

This appliance and attachments should be packed 

 

in double wall corrugated cardboard boxes with 

 

dimensions of approximately:

 

Hydropro 21 - 41cm x 41cm x 58cm

 

Hydropro 36 - 41cm x 41cm x 77cm

 

Hydropro 76 - 60cm x 59cm x 105cm

RETAIN THESE SAFETY INSTRUCTIONS FOR 

FURTHER USE.

3

Support: +61 8 9479 1444         www.pacvac.com

Содержание HYDROPRO SERIES





















Отзывы: