www.pacvac.com
Support: 08 9479 1444
8
9
notes
notes
Troubleshooting
PROBlEM:
CauSE:
SOluTIOn:
The machine does not start.
No power.
Check circuit breaker or RCD. Check plug
and ensure it is firmly plugged into the
power point.
The machine suddenly stops.
No power.
Check circuit breaker or RCD. Check plug
and ensure it is firmly plugged into the
power point.
Reduction in suction power.
Filter not installed correctly.
Refit filter making sure the rubber edging
is correctly fitted around the canister.
Hose not installed correctly.
Reconnect hose and ensure
correctly sealed.
Blockages.
Remove hose, wand and floor tools;
remove any blockages.
Blocked filter.
Clean the filter.
Tank is full.
Turn off the machine. Unplug the machine.
Empty and clean dust collection tank.
Latches do not clamp properly. Vacuum head is not placed
properly on tank.
Reposition vacuum head on tank and
clamp down.
Latches have been
damaged and deformed.
Lightly warm latches with a heat gun.
Latches will then return to their original
shape. Wait until latches have cooled down
before resuming use.
Service Requirements
Our products are designed and built to be functional and durable. As a result, if you maintain your vacuum
cleaner as instructed, it is unlikely to require servicing. For information on use and maintenance please read
the Product and Training Manual thoroughly. Should you require servicing we recommend our Pacvac Gold
Level Service Centres. For your nearest centre visit www.pacvac.com, alternatively contact Pacvac on
08 9479 1444 or e-mail [email protected].
