10
Operating Instructions
Installing battery packs to vacuum unit
(requires 2 battery packs to operate).
Removing battery packs from vacuum
unit.
1. Ensure vacuum unit power switch is in the OFF
position.
2. Press the side buttons on the battery pack to
release the battery.
1. Ensure vacuum unit power switch is in the OFF
position.
2. Ensure the charge level indicator is facing out.
3. Align the guide rails on the battery holder and
battery pack.
4. Gently slide the batteries into place until you
hear a ‘click’.
Safety and Maintenance Checks
NOTE: Any other servicing should be performed by an Authorised Service & Warranty Agent. Please do not
use if any damage is found.
1. Replace the optional
paper bag if needed.
Remove, empty and
clean the reusable
dust bag.
2. Remove the filter and
tap gently to clean.
3. Check the battery
pack for possible
damage or warpage,
and any sign of
damage to the
battery charger
cable.
4. Check the floor tool,
wand, handpiece
and hose for any
obstructions.
DAILY
3. Continue holding the buttons in and slide the
battery pack out of the machine.
UNLOCK
LOCK
