PACOM PC868, Руководство пользователя

Страница: 16 / 22

13. Trouble-shooting
Troubles or error
message
No response/
Automatically reset
The thermometer
show the symbol
“Hi”
The thermometer
show the symbol
“Lo”
Take out the batteries and replace
new ones.
Take out batteries and reinsert it
correct.
In the forehead measurement
mode:
--Temperature readings too close
together.
-- Measured the other object, such
as the sunlight, the air from the
fireplace.
Hi: Higher than ��.�℃;
In the object measurement mode:
--Temperature readings too close
together.
-- The object temperature is higher
than ���℃.
Hi: Higher than ���.�℃;
In the forehead measurement
mode:
-- The measuring distance is too
far.
-- Measured the other object, such
as the air from the air conditioner.
Lo: Less than ��.�℃
In the object measurement mode:
-- The measuring distance is too
far.
-- Have water vapor condenses on
the lens.
Lo: Less than �℃
The ambient temperature is
beyond of range of measurement
(��℃-��℃)
The sensor or hardware is
damaged
Lower battery, however you
can’t use it
Replace the new battery.
Keep the thermometer in the room
Whose Temperature is (��℃-��℃)
for �� minutes
Excluding the possibility of
temperature allowance first ,then
send the device to your dealer for
repair
The hair and sweat prevent the
temperature achievement.
Temperature hampered by an air
flux.
Please leave the status and wait for
�� minutes to measure.
Re-measure according to the
manual.
Checklists or situation
The batteries are used up？
Battery in wrong polarity or type？
Poor battery contact
Temperature hampered by an air
flux.
Countermeasures or solution
Replace new batteries.
- 15 -