PACOM PAC-MD-WDRX22, Инструкция по эксплуатации, Страница: 28 / 52

23
3.6 Shortcut of Preset Program
After selecting the desired scene, press No. ( 1 to 240 ), and press the CTRL and PRST keys
subsequently. The current view will be stored to the selected Preset number if the Preset number
is empty. If selected Preset number is not empty, “
OVER WRITE
” message will be displayed on
the monitor and select the
“OK” and push the
Joystick to the right to overwrite.
Example : 1 , 0 , 1 + CTRL + PRST keys will store current view as Preset no. 101 .
In this case, focus will be programmed as Auto, dwell time will be set to 3 second,
and the current AE mode will be programmed.
3.7 Tour
(Shortcut: TOUR )
There are 8 programmable Tours. Each Tour consists of up to 42 Preset positions, Patterns, Scans
or other Tours (second-level). Using second-level Tours, it can be expanded to over
300 functions in a single Tour.
TOUR SETUP
NUMBER : 01
TITLE : T01
SCAN TYPE : NORMAL
SPEED : 5 STEP
DWELL : -- SEC
003 A04 --- --- --- --- ---
--- --- --- --- --- --- ---
--- --- P01 --- --- --- ---
--- T02 --- --- --- --- ---
--- --- --- --- --- --- ---
--- --- --- --- --- --- ---
SAVE AND EXIT(ESC TO CANCEL)
---
Blank position
SCAN TYPE NORMAL, VECTOR
DWELL 03 ~ 99 seconds
003 Preset (1 ~ 240)
A04 Auto Scan (1 ~ 8, 10 ~ 17)
P01 Pattern (1 ~ 8)
T02 Tour (1 ~ 8)
Follow the steps below to program the Tours:
1. Press the MENU key to display the main menu on the monitor. Scroll to Tour and push the
Joystick to the right to enter the Tour menu. Or just press the TOUR key on the keyboard.
2. Select “
NUMBER
” and set the desired number by pushing the
Joystick to the left or right.
3. Choose a blank position to be programmed by pushing the Joystick up, down, right, or left.
4. To add a stored Preset, twist the Joystick then the stored Preset number displays.
5. To place functions other than Preset, press the TOUR , PTRN or SCAN keys for Tour, Pattern
or Auto Scan respectively.
6. You can also overwrite the programmed number and remove a stored number from the Tour,
press the HOME key on the stored number, a blank position mark (
---
) will be displayed.
7. Repeat step 2 through 6 for each desired position. Each title will be displayed on top of the line.