Installation
Mechanical Drawing
Installation Information
(General Overview
1
3
2
4
Accessories
1
Open package, take out the camera, unscrew the camera compression ring,
and disassemble the camera.
Wall Mount Bracket
S84187 PAC-BK323-WH
S84188 PAC-BK323-GY
Universal Junction Box(Options)
S46544 PAC-JB-EYEBALL
(Not Included)
2
Drill mounting holes on the ceiling or wall, using the camera mounting base
as a template. Also drill a cable entry hole as required to suit the position.
of the camera. Figure 1 shows the dimension of the camera mounting base.
3
Install the plastic inserts in to the drilled holes, and fix the camera mounting base
to the ceiling (or wall) by use of self-tapping screws.
4
Install the compression ring, the dome shell, and the dome shell fixed base on
the camera mounting base. Figure 2 shows camera installation.
5
Turn the main body, adjust the lens direction, and note the position
NOTE:Make sure youdon’t have any missing parts before you make the installation.
Incorrect installation could void the warranty if instructions are not followed correctly.
Please call technical for assistance if you are unsure about any procedures.
11
of the dome cover window.
6 Adjust view angle and focal length by using the adjusting tool, as shown in Figure 4.
12