paco LBC1205 Скачать руководство пользователя страница 2

1

12V AUTOMATIC LITHIUM BATTERY CHARGER

This is a fully automatic lithium battery charger with 8 charge stages.

Automatic charging protects your battery from being overcharged. So you can 
leave the charger connected to the battery indefinitely. 

8-stage charging is a very comprehensive and accurate charging process that 
gives your battery longer life and better performance compared to using 
traditional chargers.

The 8-stage chargers is designed for Lithium-ion batteries using LiFePO4 
technology only.

The 8 stages are:
Soft Start, Bulk, Absorption, Analyse, Completion, Maximization, Float And 
Maintain.

 Explosive gases may escape from the battery during charging. Prevent 

     flames and sparks. Provide adequate ventilation.

 Before charging, read the instructions.

 For indoor use. Do not expose to rain.

 For charging 12 Volt lithium-ion with LiFePO4 batteries ONLY. 

 Disconnect the 110V/220-240V AC mains supply before making or breaking 

     the connections to the battery.

 The battery charger must be plugged into an earthed socket-outlet.

 Connection to supply mains is to be in accordance with National wiring rules. 

 Do not attempt to charge non-rechargeable batteries.

 Never charge a frozen battery.

 If the AC cord is damaged do not attempt to use. It must be replaced or 

     repaired by a qualified person.

 Corrosive substances may escape from the battery during charging and 

    damage delicate surfaces. Store and charge in a suitable area.

 Ensure all vehicle accessories including lights, heaters, appliances etc are 

    turned off prior to charging.

 This appliance is not intended for use by young children or infirm persons 

    unless they have been adequately supervised by a responsible person to 
    ensure that they can use the appliance safely.

 Young children should be supervised to ensure that they do not play with the 

    appliance.

1. WARNING

2. FEATURES

Содержание LBC1205



















Отзывы: