background image

 

 

6

 

To  reduce  the  risk  of tipping  over,  pay  special  attention  when  encountering  an  obstacle  or  a 

slope, or when braking on a slope or during a turn. 

 

Never attempt to drive over a large obstacle such as rock or fallen tree. 

 

Never  operate  on  terrain  that  you  are  not  comfortable  with.  Avoid  terrain  that  is  so  rough, 

slippery or loose that you feel like you could tip over. 

 

Use  an  observer  to  help  direct  machine  when  visibility  is  poor,  terrain  is  rugged  or  hilly,  or 

maneuvering  room  is  limited.  An  observer  should  be  able  to  see  machine  and  its  immediate 

surrounding and should give pre-arranged signals to direct the operator. 

 

Driving On A Slope/Downhill 

 

When  carrying  no  load,  do  NOT  use  machine  on  a  slope  steeper  than  20  degrees.  When 

carrying a load, do NOT use machine on a slope steeper than 15 degrees. Observe the load 

limit according to the inclination. Do not dump on a slope. 

 

Never  drive  on  a  slope  that  you  are  not  comfortable  with.  Avoid  a  slope  that  is  so  rough, 

slippery, or loose that you feel like you could tip over. 

 

When  driving  downhill,  stop  and  shift to  one  of  the  first three  gears  (auxiliary  transmission  in 

Low). Go down at a reduced speed. Use engine speed to help keep machine speed low. 

 

Loading & Driving With A Load 

 

The maximum payload for this machine is 500kg. Do not exceed this maximum payload under 

any circumstance. 

 

Place  a  load  in  loading  deck  so  that  the  weight  is  evenly  distributed.  When  carrying  a  load, 

strap  it  to  loading  deck  to  prevent  it  from  shifting. Ensure  that  the  load  does  not  obstruct  the 

operator's field of view. 

 

When carrying a load, drive at a reduced speed. Allow greater distance for braking. 

 

Before  crossing  a  bridge  or  an  overpass,  make  certain  that  the  total  combined  weight  of 

machine,  load  and  operator  is  within  the  stated  weight  limit  of  the  bridge  or  the  overpass. 

Then, proceed carefully and at a constant speed. 

 

Parking 

 

Park machine on a flat, level and stable surface. Do not park in a dangerous place. 

 

Never park machine on a slope steeper than 15 degrees. Avoid parking on a slope less than 

15  degrees.  If  parking  on  a  slope  less  than  15  degrees  is  unavoidable,  block  tracks  at  the 

lower end of machine. 

 

Diesel  fuel  is  highly  flammable  and  can  be  explosive.  When  parking  machine  indoors,  make 

certain that the building is well ventilated and that machine is not close to any source of flame 

or spark, including appliances with pilot lights. 

 

Содержание MD 500-s


















Отзывы: