Packshot
Start
Mark II
HARDWARE INSTALLATION
ACRYLIC PANEL INSTALLATION:
01
02
03
Take off the top.
Install the two front acrylic diffusion
plates by sliding them down from
the top.
Three acrylic side diffusion panels
came with the system – two solid
and one with an opening.
Choose which two panels to use.
Slide in the panels from the top.
Be sure to place the panels on the
holding brackets at the base.
Replace the top. Make sure to
orient the top so that the camera
strap goes le to right when viewed
from the front.
Note:
Align the
acrylic panels with the holding
brackets at the top to hold them
in place.
Fix the top using 4 white hand
screws. If you use the acrylic side
diffusion panel with the opening,
remove the side wall and attach
the reflective door cover for
convenient side loading.
04
05
06
