Note:
Place the acrylic panel with
a small hole at bottom on the left
side when using a Packshot
Spin
O3T inside the Packshot
Compact
,
so the power and USB cables can
be strung through the small hole
and then pluged into the power
jack and USB port on the frame of
the bottom light panel respectively.
Reverse steps
01
to
04
to replace
the top and top light.
Note:
Align the acrylic panels
between the metal guide brackets
on the top, before tightening.
(Optional):
The acrylic panels can
also be installed through the front
when the front door is detached.
Insert the acrylic panels between
the guide notch on the bottom.
07
08
09
Packshot
Compact
HARDWARE INSTALLATION
ACRYLIC PANEL INSTALLATION 2/2:
Respectively insert the acrylic
panels between the metal guide
bracket on the top.
Finally slide the rest of the panel
into the guide notch on the back
wall holding bracket.
10
11
