SHAPING INSTRUCTIONS
Shaping the tree branches is the last step of assembly. The care and attention given to this final
process will result in a genuinely beautiful and appealing holiday centerpiece.
1.Every tree style is shipped from the factory with the tips of each branch
compressed to the center ( Fig5 ).
2.Each branch tip must be shaped to it’s proper position to give the tree
natural look. Spread tips away from the branch gently( Fig6 )
3.Each individual tip should then be spread out separately. Tips
should then be bent slightly upward to add a more natural looking appearance.
Fig. 7 shows a typical tree branch after shaping . Branch tips should be carefully pressed
back toward center tip when tree is disassembled for storage in original carton.
.
Fig .5
Fig 6
Fig.7
Retain carton only for storage purposes.
These instructions are for your proper use and your safety.
Please read them thoroughly before use and retain forfuture reference.
The appliance is not to be used by persons (including children) with reduced physical,sensory or metal
capabilities,or lack of experience and knowledge, unless they have been given supervision or instruction.
Children should be supervised to ensure that they do not play with the appliance.
SAVE THESE INSTRUCTIONS
CUSTOMER AID FOR CHRISTMAS TREE
For any questions, comments, problems or missing parts, it's recommended not return to place of purchase.
Please call Winners at 1-844-946-8733 or email us at [email protected]
Warning:
Changes or modifications to this unit not expressly approved by the party responsible for
compliance could avoid the user’s authority to operate the equipment.
NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
