Packet Power BGS72, Инструкция по установке, эксплуатации и обслуживанию

Страница: 17 / 30

Packet Power Multi-Circuit Monitor BGS72 User Manual V2.0
© 2021 Packet Power, LLC Page 17 of 30
Run CT leads to the circuits
Run the CT leads (or wire harness) to the circuits being monitored and secure as desired. The
leads (or wire harness) will be attached to the CT Interconnect Board. Each CT lead will
have a label (standard labels are CT1, CT2, CT3, etc.).
CTs
The BGS72 supports 27 to 72 split core or Rogowski coil CTs of varied amperage and size.
SPLIT CORE CTs
Split core CT Specifications
CT quantity 27 to 72
CT type Split core
Accuracy +/- 1.0%
Inside diameter Varies by model
Outside dimensions (H x W x D) Varies by amperage
Rated amperage 15A to 4000A
CT tail length 100 mm or 500 mm to quick disconnect
CT lead length 0.5 to 5 m
CT tail and lead wire 24 AWG, 600V twisted pair