Packet Power BGS72, Инструкция по установке, эксплуатации и обслуживанию

Страница: 16 / 30

Packet Power Multi-Circuit Monitor BGS72 User Manual V2.0
© 2021 Packet Power, LLC Page 16 of 30
CT Interconnect Cables and Boards
The CT Interconnect Boards are connected to the BGS72 via the CT Interconnect Cables.
The interconnect cables and boards are labeled to ensure proper connection.
Mount CT Interconnect Boards
The green CT Interconnect Board is fastened to a 72 x 53 x 6.3 mm acrylic base and includes
VHB adhesive tape on the back of the base.
Clean the area thoroughly, then mount the CT Interconnect Boards inside the panel or near
equipment being monitored using the VHB adhesive tape (or mount using 5/32” screws). Be
sure to orient the CT Interconnect Board so the black connector header faces away from the
circuits or panel.
Attach Interconnect Cables to Interconnect Boards
Attach the connector at the end of the CT Interconnect Cable to the corresponding CT
Interconnect Board header. The interconnect cables and boards are labeled to ensure proper
connection.
CT Leads
Split core CTs are connected to the CT Interconnect Board via loose twisted pair leads.
Flexible CT wire harnesses consisting of 16 leads per harness in multiple configurations are
available.
Loose leads are best suited to equipment such as switchgear that has widely- or unevenly-
spaced circuits. Wire harnesses are best installed with evenly-spaced circuits.
Always orient the CT Interconnect board’s
header away from the circuits
CT Interconnect Cable to monitoring unit