4
S8Mpd Quick Start Guide
pakedge
device&software
inc
pakedge
device&software
inc.
The rear panel (
Figure 2
) is where the ports and other equipment connections are located.
Table 3
describes
each port and its function.
Figure 2: Rear Panel of the S8Mpd
Name
Explanation
DC connector
12V/1A
8 10/100/1000M
Ports
Implement 10/100/1000M Ethernet signal transformation. Port 1
is used to power the switch using PoE.
1 SFP Port
Implements 10/100/1000M Fiber connection using a GBIC
Console
Implements switch management using a console cable
Reset
Resets switch to factory defaults.
Table 3: Description of the Rear Panel of the S8Mpd from left to right
Preparing to Install the Switch
Tools Required:
PC or Laptop with Ethernet Interface (an integrated DB-9 port or USB to Serial adapter may be
necessary if you would like to use the console interface)
Ethernet Cable (RJ45 Cable)
Phillips Screwdriver (if using Rack-mount Brackets)
Installation
1.
Open Box and Remove Unit.
a.
OPTIONAL: If mounting the switch in a standard 19” AV rack, attach the rack mounting
brackets, included with the S8Mpd, to the sides of the unit. The switch can also be
mounted to the wall using the same included rack mounts. See images below.
