8 |
C 4 A s s e m b l y & I n s t a l l a t i o n G u i d e
3
INSTALLING PLUS NUTS
1.
Lift shelf unit so that it is out of the way.
2.
Drill holes using a 1/2" drill bit with a collar to stop drill at 1/2" depth.
WARNING: Check for wiring or gas tanks BEFORE drilling into floors, pillars, headliners, or walls.
Using a 1/2" drill bit with a 1/2" Drill Collar, drill
out all of the marks from the previous step. Install
Plus Nuts into drilled holes. Only use Plus Nuts in
places where Bolts and Nuts cannot be used.
Tools:
Cordless Drill
1/2" Drill Bit with Drill Collar (Set to 1/2" Depth)
Hardware:
4 x
5/16” Plus Nuts
Plus Nuts
