Packard Bell oneTwo M3850 / oneTwo M3851 / oneTwo L5850 / oneTwo L5851 Service Guide
41
Removing the Processor
1.
Remove the HSF assembly by following the procedure described on the previous section.
2.
Disengage the load lever from its latch (
a
), then rotate the load lever to the open position (
b
).
3.
Open the retention plate to expose the socket body.
4.
Gently lift the processor out of its socket.
IMPORTANT
When installing a processor:
•
Note the golden arrow on the corner to make sure the processor is properly oriented over
the socket.
•
Moisten a soft cloth with isopropyl alcohol and clean the processor die to remove any
thermal grease residue. Wipe the die surface several times to make sure that no particles
or dust contaminants are evident. Allow the alcohol to evaporate before continuing. Apply
just enough thermal grease to evenly coat the surface of the processor die.
Содержание oneTwo L5850
