Packard Bell ixtreme M5850, Руководство по обслуживанию

Страница: 81 / 104

75
Error Symptom Action/FRU
Video and Monitor
Video memory test failed.
Video adapter failed. 1. Remove all non-factory-installed cards.
2. Load default settings (if screen is readable).
3. Main board
Display problem:
- Incorrect colors
No high intensity
Missing, broken, or incorrect characters
Blank monitor (dark)
Blank monitor (bright)
Distorted image
Unreadable monitor
Other monitor problems
1. Monitor signal connection/cable.
2. Monitor
3. Video adapter card
4. Main board
Display changing colors. 1. Monitor signal connection/cable
2. Monitor
3. Main board
Display problem not listed above
(including blank or illegible monitor). 1.
“
Monitor"
2. Load default settings (if screen is readable).
3. Main board
Parallel/Serial Ports
Execute
“
Load BIOS Default Settings
”
in BIOS Setup to confirm ports presence before diagnosing any
parallel/serial ports problems.
Serial or parallel port loop-back test
failed. 1. Make sure that the LPT# or COM# you test is the same as the
setting in BIOS Setup.
2. Loop-back.
3. Main board.
Printing failed. 1. Ensure the printer driver is properly installed. Refer to the
printer service manual.
2. Printer.
3. Printer cable.
4. Main board.
Printer problems. 1. Refer to the service manual for the printer.
Keyboard
Some or all keys on keyboard do not
work. 1. Keyboard
Power Supply
Pressing power switch does not turn off
system. (Only unplugging the power
cord from electrical outlet can turn off the
system.) 1. Ensure the Soft-off by PWR-BTTN. in BIOS Setup of Power
Management is not set to Instant-off.
2. Power switch cable assembly
Pressing power switch does not turn on
the system. 1. Ensure the power override switch (situated at the back of the
machine, just above the connector for the power cable) is not set
to OFF.
2. Power switch cable assembly.