Packard Bell ENTJ75, Руководство по обслуживанию

Страница: 78 / 164

CHAPTER 3: Replacing notebook components
72
Replacing the speakers
Tools you need to complete this task:
Screws removed during this task:
•
1 black M2×5 (hard drive)
•
1 black M2.5×6 (optical drive)
•
3 black M2.5×6 (keyboard cover)
•
2 black M2.5×6 (LCD panel hinges - bottom)
•
2 black M2.5×6+Nylok (LCD panel hinges - top)
•
10 M2.5×6 black (palm rest - base side)
•
3 M2.5×6 black (palm rest - top side)
•
2 chrome M2×3 (speakers)
To replace the speakers:
1
Complete the steps in “Preparing the notebook” on page 47 .
2
Remove the palm rest by performing steps 2 – 18 of the “Replacing the palm
rest” procedure on page 68 .
3
Turn the palm rest over so that its underside is facing up.
4
Peel off the tape covering the left speaker screw.
Phillips #0 screwdriver
Flat screwdriver or Non-marring plastic scribe