8
Fig. 9:
Removing the front USB port
2. Extract the white connector to disconnect the USB cable from the USB port.
3. To remove the USB cable also, disconnect the USB cable from the motherboard
and remove it from the chassis.
Fig. 10:
Disconnecting the front USB port cable
Removing the Switch/LED Assembly
To remove the switch/LED assembly and the cable, first remove the front bezel (see section
) and remove the left side cover (see section
); then follow the steps below:
1. Disconnect the cable from the motherboard.
2. Remove the screws securing the switch/LED assembly to the chassis.
Fig. 11:
Removing the switch/LED assembly
3. Disconnect the switch/LED assembly cable from the motherboard.
Packard Bell Daytona Disassembly Manual
Содержание Daytona
Страница 1: ...Packard Bell Daytona Disassembly Manual ...
