4
Removing the Front Bezel
To remove the front bezel, do as follows:
1. Turn off the computer, the monitor and all peripheral devices.
2. Disconnect all power and data cables connected to the computer.
3. Face the front of the unit.
4. Locate a handhold under the chassis.
5. Carefully pull the front bezel, lift it straight off and away from the chassis.
Removing the Left Side Cover
To remove the left side cover, first remove the front bezel (see section
) and then perform the following steps:
1. Remove the two screws that hold the left side cover.
Fig. 1:
Removing the left side cover screws
2. Carefully slide the side cover two centimetres towards the front of the chassis.
3. Lift the side cover out and away from the chassis.
Fig. 2:
Removing the left side cover
Removing the Right Side Cover
To remove the right side cover, first remove the front bezel (see section
) and then perform the following steps:
Packard Bell Daytona Disassembly Manual
Содержание Daytona
Страница 1: ...Packard Bell Daytona Disassembly Manual ...
