12
2. The filters are recommended to be cleaned at weekly or at least monthly basis. If the
area is very dusty then the filter has to be cleaned more often than the recommended
basis.
3. To clean the filters, the user can wipe it with clean cloth or rinse it with clean water.
4. It is better to dry the filter after cleaning before they place back to the wine cooler. The
filters have to place back right after cleaning to avoid dust enter into the appliance.
5. The damaged filter has to replace immediately, the filter could be purchase from
Pacifica Service Centre or the authorised dealers.
6. Do not use abrasive detergent, powder cleaner, oven cleaner, cream cleaner and any
other corrosive cleaning agent that will damage or discolour the filters.
7. Depend on the cleaning detergent used, to clean the filters in a dishwasher can cause
permanent discolouration to the filters. However, the filters could still be used as the
structure is not damage.
Caution: A saturated and unclean filter could result in fire hazard.
Replace new bulb
1. This wine cooler model PTW10 is using the LED bulbs for illumination.
2. Do not starts replace the bulb unless the appliance is disconnected from the power
supply. Make sure the power is turned off and the plug is withdrawn out from it
completely.
6. Remove the cover before fit in the new light bulb and place back the cover after
replacement is done.
7. Connect the appliance back to power supply and turn the light on to test it.
TROUBLESHOOTING
Problem
Possible cause
Solution
The wine cellar is
not functioning
- Wine cellar is not connected or
the power cord does not work
properly.
- Make sure the wine cellar is
connected to power source
firmly.
- The power cord is damaged.
- Contact Pacifica Service Dept
for advice
- The power supply of the socket
does not suit the appliance
- Contact Pacifica and Pacific
Service Dept for advice
- The circuit board is spoilt
- Contact the service team to
repair the circuit board or
replace it
