INSTRUCTIONS FOR USERS
This hob is only used with gas only as it is indicated below the hob.
IGNITION OF BURNER
1. Check to make sure that the gas supply is accessible and set
up with the necessary and appropriate fittings/connectors.
2. Turn all control knobs to off position.
3. To ignite, press the knob and rotate it to the maximum gas
flow position.
4. When releasing, ensure flame is still on.
5. When the flame is still on, turn the knob to adjust the flame
size according to your need and this need no pressing on the
knob.
6. To off, rotate the knob clockwise to off position until you hear
the safety tap’s distinct click.
7. If the burner has been reinstalled or not been use for long
time, it will take some time to get rid of the air inside the gas
pipe.
8. Please refer to the drawing for flame adjustment
USING THE HOB
1. To ensure maximum efficiency, it is recommended that you
use only pots and pans with the bottom size that fit the size of
the burner. See Table 1.
Table 1
Burner
Minimum Diameter
Maximum Diameter
Big
160mm
240mm
Medium
120mm
220mm
POTTERY
1. Always use pots which properly fit what you have to cook.
2. Make sure the pans or pots are not too small in order to avoid
overflow.
3. Use pans and pots with the right diameter so the amount of
gas consumption can be reduced.
