Pacific TIGERRAY 21, Инструкция по эксплуатации и обслуживанию

Страница: 5 / 16

5
OPERATION
C. MOVEMENT
1. Follow the machine (straight ahead) at a moderate
walking speed. Always keep the machine moving
while the pad is touching the floor.
2. Keep hands, fingers and feet clear of all moving
parts while the machine is in operation.
NEVER TILT BACK MACHINE TO MAINTENANCE
POSITION WHILE ENGINE IS RUNNING.
DO NOT USE FOR WET SCRUBBING OPERATIONS
D. STOPPING THE ENGINE
1 . Turn the propane tank valve clockwise to a closed
position, then turn the key OFF.
NOTE: The exhaust system will be very hot and
takes several minutes to cool, so keep yourself and
all materials clear!
E. TRANSPORTING THE MACHINE
The tank should be securely fastened and tank valve
must be closed.
F. CLEAN THE EQUIPMENT
Place machine in the “tilt back” position with the handle
forward and clean the equipment.
G. STORING THE MACHINE & TANK
1. Remove the LP tank from the machine and store the
tank in an well ventilated approved area.
2. Store your machine in a safe area: away from en-
closed high heat, away from sparks or flames, away
from traffic lanes of heavy equipment.
PROVIDE AND USE EAR PROTECTION DURING
OPERATION.
NEVER LET AN UNTRAINED PERSON OPERATE OR
PERFORM REPAIRS ON THE MACHINE. THEY MAY
HURT THEMSELVES, DAMAGE THE FLOOR OR THE
EQUIPMENT.
ENGINE SPEED NOT TO EXCEED 3400 RPM.
THIS MACHINE IS NOT SUITABLE FOR PICKING UP
HAZARDOUS DUST.
DO NOT USE ON SURFACES WITH A GRADIENT
EXCEEDING 2%.
A. PREPARE THE MACHINE FOR OPERATION
1. Follow steps A through E in the previous section
and determine the best pad for the task.
B. START ENGINE.
1. Start engine with machine tilted so pad is off floor.
2. Open propane (LPG) tank valve (counter clockwise).
3. Set the throttle control at idle for 12V system.
4. Turn key to the start position and move throttle
toward fast position. If engine does not start, re-
lease key and return to step “4”.