Pacific PR-6830AS, Инструкция по эксплуатации, Страница: 13 / 24

8.
VIII. Troubleshooting
Problem
Motor stops
running
Possible Cause Solution
1. No power (burnedwire or fuse) 1. Replace the PC board
3. Motor copper wire is burned 3. Replace motor
4. Capacitor defected 4. Replace capacitor
1. Distorted capacitor or low power 1. Replace capacitor
1. Short circuit on the motor 1. Replace motor
2. Motor defected 2. Replace motor
2. Replace motor
1. Capacitor defected 1. Replace capacitor
1. Recommend changing your cooking
routine slightly
2. Electrical wiring is off 2. Fix the electrical wires
1. Main control PC board failed
2. PC board switch failed
2. PC board switch failed
2. PC board failed switch
1. Short circuit on LED light control power cord
1. Replace main control PC board
1. Water got in the motor 1. Replace motor
1. Main control PC board failed 1. Replace main control PC board
2. Short circuit on the light power cord in the main
control PC board
2. Replace main control PC board
2. Replace PC board switch
5. No power (burned wire) or burned fuse 5. Check power meter
(replace power cord)
2. Air comes out of the air outlet instead
of sucks up
1. Motor stops running when it reaches unusual
high temperature, and starts again when it
cools down to normal cooking temperature.
This is cause by temperature running too high
during cooking.
2. Air outlet or exhaust pipe is blocked
and needs cleaning
1. Raplace LED light control power cord
3. LED light failed 3. Replace LED light
2. Motor temperature regulator is off and can’t
be recovered
2. Replace motor
Motor speed
slows down
automatically
Inverted fan
blades
Motor doesn’t
regulate speed
Motor runs on
and off
Delay-off
function fails
Power leakage
Display unit
failed
LED light not
working