Pacific PQ6830AB, Инструкция по эксплуатации

Страница: 15 / 44

13 www.2pacific.com
Installation Procedures
–
Wall Mount
10. Use (4)M4x8 round head screws to screws the
collar on the top of hood.
11. Install duct work and seal with aluminum
duct tape.
12. Remove the protective film from oil tray and
install it on the lower side of appliance.
13. Plug the appliance for a test run.
14. Turn on the light and you can open the
deflect panel.
When the panel is open, please take down the
baffle filters, and re-install the filters after remove
the protective film from those filters.
9. And use(2) 1-1/2" wood screws to screw the
appliance on the wall.
7. Use the two holes under backside to hang
the appliance on the installation template .
8. Fix the support brackets with (2) M4x8 round
head screws above the appliance .