MAINTENANCE
Good maintenance procedures assure better operation,
fewer repairs and longer life to your machine.
DISCONNECT THE ELECTRICAL PLUG OF THE MA-
CHINE FROM THE ELECTRICAL OUTLET BEFORE
DOING ANY CLEANUP, REPAIRS OR MAINTENANCE
OF THE MACHINE AND WHEN LEAVING THE MA-
CHINE UNATTENDED.
CLEAN THE MACHINE AFTER EACH USE:
1.
Wipe the outside with a clean cloth
.
2.
Clean the collector tank
: Release the clamps
on each side of the tank and head assembly. Lift
the head assembly off and set aside. Wipe the
inside of the collector tank with a clean cloth.
3.
Clean the HEPA filter:
Remove the HEPA filter by
flipping the head assembly upside down and pull-
ing up on the base of the filter where it slides onto
the float assembly. Rinse in a sink and let air dry.
ELECTRICAL CABLE:
Check the cord for any nicks, cuts or damage.
Report these to your supervisor for correction.
VACUUM HEAD ASSEMBLY:
1.
Gaskets
: Clean the vacuum head gasket and the
float shut-off gasket.
2.
Float Shut-Off Device
: This should move freely.
Remove any debris or strings from the float cage.
3.
Head Assembly
: Replace and leave ajar if the
collector tank is damp to prevent mildew.
WHEELS AND CASTERS:
Check these for cuts and nicks. Remove any strings or
debris that may restrict the free movement of the wheels.
Wipe the treads clean.
4
Содержание GULPER 12SS
Страница 5: ...5...
