Page 6
Phytoplankton Reactor
Important!
The Air OUTPUT valve must stay always OPEN during the reactor
normal operation.
The LED tube power supply should be connected to the some external
timer and work hours should not exceed 10-11h per 24h.
Warranty exclusion:
Excluded are all claims for compensation exceeding damages of
material and manufacturing defects, as well as damages caused
by incorrect usage and opening of the housing, repairings, or
exchanging of parts by unauthorized persons.
3 ) Fill the reactor with fresh mixed saltwater (
do NOT use water from the tank!
), and
do
NOT exceed the marked top water level
.
4 ) Add phytoplankton cultures to the reactor and close the top lid. Tight all the screws
(do
NOT
over-tight).
5 ) Start the AIR PUMP – make sure that the air bubbles are coming out from the tube
(remember to leave the
Air OUTPUT valve OPEN
).
6 ) Turn ON the LED tube light
LED tube light
Warranty:
Starting from the invoice’s date, we grant a warranty period of 24 months
for your PhytoReactor.
This warranty includes all material damages and manufacturing defects
and is only applicable if the PhytoReactor has been handled correctly and
according to this instruction. Please send the defective device and the
invoice to your supplier or directly to Pacific Sun Service address.
Maximum daily water exchange (add fresh saltwater and take out phytoplankton water)
about 20-30% of the reactor volume.
In case of any reactor operations/maintenance like cleaning, adding water manually,
etc... ALWAYS disconnect the LED tube
LED tube
power supply first.
The LED tube
LED tube
, power supply plug, and LED tube
LED tube
socket are not waterproof and AVOID
any water splash. The warranty will not cover damages caused by water.
5
4
The lower part of the reactor is equipped with a specially profiled cone to facilitate the
collection of ready (mature) liquid as well as the removal of dead algae from the reactor
chamber.
4
